DK-35 Personal Monitor Amplifiers
Versatile and portable- the new DK-35 PA workstation combo in a kickback style cabinet with a reflex loaded 10" coaxial loudspeaker. It features two channels, a Main EQ with bass/treble controls, a built in reverb with level control, a headphone socket for private listening and a DI output allowing you to connect to a PA or recording.
Applications: perfect amp for electronic keyboard, drum, electronic and acoustic guitar, bass, and Singing sound.
Features:
The Mic input is designed for low impedance microphone that is balance input.
The line in socket is designed for line level signals such as keyboards, sound modules and sound card. Both mic and line socket may be used at the same time.
The DK-35 has a built in spring mic reverb, the level of reverb effect is determined by this control( the reverb effect used only for microphone voicing.)
Low/bass control- Rotate the control clockwise to boosted or cut the low frequencies such as bass guitar, kick drums, deep vocals and key below middle c on a keyboard.
CD In, DI and Headphone output.
• SPECIFICATIONS:
• Rated Power: 35 watts RMS into 4 ohms,
• Power Consumption: 50 watts, 50/60 Hz, 230 VAC
• Input Sensitivity:
• Channel 1:
• microphone : 2K input impedance
• Line In: 10K input impedance
• Channel 2( line In): 10K input impedance
• EQ System:
• Bass: 15dBu at 60Hz
• Treble: 15dBu at 10KHz
• Reverb: Yes
• Internal loudspeaker: 10"coaxial loudspeaker
• DI Main out: Yes
• Headphone: Yes
• Size:
• Unpacking size: 430mmX390X340H*W*D
• Unit weight: 12kg
• Packing weight: 14kg
Elite-15/30 Guitar Amplifers
FEATURES:
• 4 Essential Amp Models(Clean;Crunch;Metal;Ultra.)
• 6 Effects (2 simultaneous) including phaser, Chorus/Flanger, Tremolo, Sweep Echo, Tape Echo, and Reverb
• 4 programmable Amp models
• CD/MP3 jack
• Headphone/Direct Out for practice or recording
• Elite-15/Coolmusic 1X8” speaker ; Elite-30/Coolmusic 1X12" speaker
• Elite-15/15Watts;Elite-30/30-45Watts
Amp Models
The four Amp models each use a different Amp Model, and all come pre-loaded with a factory favorite dialed in to nail
a great tone. Press one of these buttons to hear the presets. To replace any preset with your own “snapshot” of all
tone and effect knob positions (except Master Volume), press and hold one of these four buttons for three seconds.
The light flashes when the save is complete.
Tone Controls
Gain control how much “dirt” you get in your sound. Bass, Mid, and Treble controls are customized for each Amp
models to give you best tonal control.
Models Vol
This control helps you balance the volumes of the amp-and-effect setups that you store in your ELITE’s Amp models.
See (2) above for the lowdown on models.
Smart Effect Control
Spin one of these knobs to get great effect, fast and easy: The first knob picks chorus/flange, phaser or tremolo, with
a range of settings—from subtle to overpowering—for each effect. The second knob picks tape echo, sweep echo or
reverb with a range of mix settings from low to high. When you select an echo effect the Delay Time light flashes the
delay time; tap it to change the time.
Delay Time
Press the Delay Time button at least two times to set the delay time when either Tape Echo or Sweep Echo is active.
The light will be lit solid when Reverb is active, and will be off when no echo or reverb effect is active. (Also see ”Tap
Button Extra Functions”).
Master Volume
You can adjust overall volume of the amplifier, without affecting your tone.
CD/MP3 In
Listen and play along with CD or MP3 tracks by connecting to this 1/8-inch input.
Headphone/Record Out
Listen with headphones, or use this as a direct out for recording! (The speaker is muted when this jack is in use).
Delay Button Extra Functions
The Delay Time button, not only can set the time of your echo effects, but can also lets you access a Distortion Boost
and a built-in Noise Gate.
Distortion Boost
Press and hold the Delay Time button as you turn the Gain knob up past twelve o’clock. As you do this, ELITE’s CLEAN
Models light comes on to indicate that the Distortion Boost is on. This gives the kind of extra ‘dirt’ that you’d expect
from a Distortion pedal with the distortion control set low and the output control set high. It boosts your guitar signal
before it reaches the Amp Model, so that you hit the model harder and get a more distorted sound.
Noise Gate
Press and hold the Delay Time button as you turn the echo/reverb FX knob up past twelve o’clock, and you’ll turn on a
built-in Noise Gate to help cut down on noise. As you do this, the ULTRA Model light comes on to indicate the Gate is
on.
Special Hidden Functions
When you select an Amp Model, Elite series guitar Amp, automatically sets its tone controls and effects to match that
Amp Model. You can disable the auto-FX selection, (but not tone control auto-selection) by powering up ELITE with the
ULTRA Model button held. The auto-selection will be re-enabled next time you power up.
You can also reset your Elite series guitar amp’s programmable channels to their factory-programmed states by holding
down the CLEAN Channel button as you turn on the power. Warning: This will erase ALL custom sounds you might
have saved. Before do it, Please make sure you really want to erase all of them.
Unique-15G Guitar Amplifier
It is our most compact guitar amp, without complicated affects in it, but it does sound very well, it features dual selectable channels ("normal" and "drive"), multifunctional input for CD or drum machine use, a headphone jack and separate controls for treble, mid, bass, volume, gain and drive. Small package; great sound!
Features:
• 15 watts into 8 ohms
• Speakers: 1-8"" coolmusic® Special Design Speaker.
• Channels: Two Selectable Channels (Normal and Drive)
• Features 3-Band EQ, Headphone Jack,
• Auxiliary Input for CD, Tape or Drum Machine, Closed Back
Unique-25R Guitar Amplifier
It is our most compact guitar amp, without complicated affects in it, except a simple reverb effect but it does sound very well, it features dual selectable channels ("normal" and "drive"), multifunctional input for CD or drum machine use, a headphone jack and separate controls for treble, mid, bass, volume, gain and drive. In addition, there is also a footswitch for remote channel selection. Small package; great sound!
Features:
• 25watts into 8 ohms
• Speakers: 1 12"" coolmusic® Special Design Speaker.
• Channels: Two Selectable Channels (Normal and Drive)
• Simple reverb effect, footswitch for remote channel selection.
• Features 3-Band EQ, Headphone Jack,
• Auxiliary Input for CD, Tape or Drum Machine, Closed Back
TS-110 Bass Amplifier
The TS-110 (Thunder Sound) bass combo amp is excellent choice for beginners. This 35 watt lightweight bass amp has Coolmusic advanced circuitry that transforms the tone of this amp from classic to modern with a flip of the voicing switch ,
The three-band equalizer allows you to mix your sound. The heavy-duty 12 inch coolmusic speaker is protected by DDT™ technology for extra ruggedness, also with headphone out and CD player input make self practice more easier.
Features:
• 35 watts (rms) into 8 ohms
• 10 inch cutomized coolmusic speaker
• DDT™ speaker protection & Gain control
• Classic /modern voicing switch
• Low, Mid, and High EQ controls
• CD/Line-In input & Headphone input
The three-band equalizer allows you to mix your sound. The heavy-duty 12 inch coolmusic speaker is protected by DDT™ technology for extra ruggedness, also with headphone out and CD player input make self practice more easier.
Features:
• 35 watts (rms) into 8 ohms
• 10 inch cutomized coolmusic speaker
• DDT™ speaker protection & Gain control
• Classic /modern voicing switch
• Low, Mid, and High EQ controls
• CD/Line-In input & Headphone input
TS-112 Bass Amplifier
The TS-112 (Thunder Sound) bass combo amp is excellent choice for beginners. This 60 watt lightweight bass amp has Coolmusic advanced circuitry that transforms the tone of this amp from classic to modern with a flip of the voicing switch ,
The three-band equalizer allows you to mix your sound. The heavy-duty 12 inch coolmusic speaker is protected by DDT™ technology for extra ruggedness, also with headphone out and CD player input make self practice more easier.
Features:
• 60 watts (rms) into 8 ohms
• 12 inch coolmusic speaker
• DDT™ speaker protection & Gain control
• Classic /modern voicing switch
• Low, Mid, and High EQ controls
• CD/Line-In input & Headphone input
M-2 Multifunctional Portable Amplifier
Versatile and portable, the new M-2 Multifunctional portable amplifier delivers 80 watts of punch through a rugged, high-quality 10 inch coaxial customized COOLMUSIC two-way speaker. Additional advanced features includes build-in 99 digital effects, Mp3 player, build in LCD with blue light background. The amp also can be connected with one additional external speaker to reach a total 200W power rate. With 3 Channels input and various effects, the M-2 is built to handle a wide range of music applications, such as keyboard, Drum, electric, Classic guitar. It can be easily and safely transported from location to location thanks for its built-in draw bar and wheels.
Features:
• One 10 inch coaxial professional speaker,80 watts internal‚ can reach 160 watts with a external additional speaker.
• 99 build-in effects include Reverb, Delay, Flanger Pitch shift........
• Mp3 processor, with play/pause and volume function
• Two line LCD display with blue light background.
• Two channel line Input, One Channel Low-Impedance Input One Channel Monitor Input
• 1/4" jack Headphone monitor output
• Low-noise‚ electronically-balanced XLR connector Main Line Out
• External speaker capability
• Two heavy wheels with steel carry bar
Applications: Supply power as an amp for electronic keyboard, drum, electronic and acoustic guitar, bass, and Singing sound.
M3 Net Weight: 14.5KG Gross Weight: 17KG Volume: 0.1CBM (size: 390x450x570)
M-3 Multifunctional Portable Amplifier
Versatile and portable, the new M-3 Multifunctional portable amplifier delivers 120 watts of punch through a rugged, high-quality 12 inch coaxial customized COOLMUSIC two-way speaker. Additional advanced features includes build-in 99 digital effects, Mp3 player, build in LCD with blue light background. The amp also can be connected with one additional external speaker to reach a total 200W power rate. With 4 Channels input and various effects, the M-3 is built to handle a wide range of music applications, such as keyboard, Drum, electric, Classic guitar. It can be easily and safely transported from location to location thanks for its built-in draw bar and wheels.
Features:
• One 12 inch coaxial professional speaker,120 watts internal‚ can reach 200watts with a external additional speaker.
• 99 build-in effects include Reverb, Delay, Flanger Pitch shift........
• Mp3 processor, with play/pause and volume function
• Two line LCD display with blue light background.
• Two channel line Input, One Channel Low-Impedance Input One Channel Monitor Input
• 1/4" jack Headphone monitor output
• Low-noise‚ electronically-balanced XLR connector Main Line Out
• External speaker capability
• Two heavy wheels with steel carry bar
Applications: Supply power as an amp for electronic keyboard, drum, electronic and acoustic guitar, bass, and Singing sound.
M3 Net Weight: 18KG Gross Weight: 22KG Volume: 0.15CBM (size: 460x510x620)
